乐竞体育（中国）有限公司

Hotline: +86-0769-83660708

Website

about us

case

news

contact us

Contact Us

Main product

Three-blade Micro Cooling Fan

"Micro Cooling Fan" only three blades is not surprising, the most common fans is the case, but in the small DC brushless fan this design is rare. As mentioned above, an e...

2015-7-23
220V Cooling Fan base design

First, let's look at this "220V Cooling Fan" base design, not simply the motor with the power switch, the wind gear combination. The fan base and the wind box can be sepa...

2015-7-23
220V Cooling Fan a wide range

Border hollow "220V Cooling Fan"
Four open frame design is actually derived from a fully enclosed, like Venus 10A fan Tt is this design. This increases the fan into the ...

2015-7-23
220V Cooling Fan nano-ceramic bearings

And ball "220V Cooling Fan" compared nano-ceramic bearing fan noise has been well controlled, the occurrence of noise is lower than the double ball bearing 2-3dB. Nano-ce...

2015-7-23
220V Cooling Fan parameter How to View

"220V Cooling Fan" air volume, a measure of a fan of one of the most intuitive abilities important principle, the unit is marked CFM cubic feet per minute. Noise level is...

2015-7-23
220V Cooling Fan noise

In addition to the cooling effect, "220V Cooling Fan" operating noise is everyone throughout the importance of the problem. Fan noise is noise when the fan size seizure o...

2015-7-23
Micro Cooling Fan introduction of technology digestion and Improvement

In recent years, "Micro Cooling Fan" industry has developed a range of efficient new DC fans, especially with the introduction of the digestion and improve the technology...

2015-7-22
Micro Cooling Fan Test Method

1. Current: "Micro Cooling Fan" current measurement continues to rotate after 3 minutes
2. Speed: The speed measurement continues to rotate after 3 minutes
3. Start vol...

2015-7-22
Micro Cooling Fan cooling principle

"Micro Cooling Fan" by virtue of the rotating blades to push to accelerate the flow of air. Therefore, the quality of the fan air flow, pressure, noise and other performa...

2015-7-22
Micro Cooling Fan to withstand wind pressure

"Micro Cooling Fan" during fan operation, to minimize wind resistance, so smooth, should try to make the first fan blade from the root to the tip of per unit area subject...

2015-7-22

First Previous 111 112 113 114 115 116 117 Next Last to

+86-0769-83660708

Home Product News Contact